RS4OSINT/docs/search.json

[
  {
    "objectID": "ch2.html#optical-imagery",
    "href": "ch2.html#optical-imagery",
    "title": "2  Data Acquisition",
    "section": "2.1 Optical Imagery",
    "text": "2.1 Optical Imagery\n\n\n\nSentinel-2 timelapse showing the ancient city of Hasankeyf being flooded following the construction of a dam by the Turkish government.\n\n\nOptical satellite imagery is the bread and butter of many open source investiagtions. It would be tough to list off all of the possible use cases, so here’s a handy flowchart:\n\n\n\n\n%%{init: {'theme': 'base', 'themeVariables': { 'primaryColor': '#FFFFFF' ,'primaryBorderColor':'#000000' , 'lineColor':'#009933'}}}%%\n\nflowchart\n  A(Does it happen outside?) \n  A--> B(Yes)\n  A--> C(No)\n  D(Is it very small?)\n  B-->D\n  E(Yes)\n  F(No)\n    D-->F\n    D-->E\nG(Use optical satellite imagery)\nH(Don't use optical satellite imagery)\nE-->H\nF-->G\nC-->H\n\n\n\n\n\n\n\n\nThis is, of course, a bit of an exaggeration. But if you’re interested in a visible phenomenon that happens outdoors and that isn’t very tiny, chances are an earth-observing satellite has taken a picture of it. What that picture can tell you naturally depends on what you’re interested in learning. For a deeper dive into analyzing optical satellite imagery, see the subsection on multispectral remote sensing..\nThere are several different types of optical satellite imagery available in the GEE catalogue. The main collections are the Landsat and Sentinel series of satellites, which are operated by NASA and the European Space Agency, respectively. Landsat satellites have been in orbit since 1972, and Sentinel satellites have been in orbit since 2015. Norway’s International Climate and Forest Initiative (NICFI) has also contributed to the GEE catalogue by providing a collection of optical imagery from Planet’s PlanetScope satellites. These are higher resolution (4.7 meters per pixel) than Landsat (30m/px) and Sentinel-2 (10m/px), but are only available for the tropics. Even higher resolution imagery (60cm/px) is available from the GEE catalogue from the National Agriculture Imagery Program, but it is only available for the United States. For more details, see the “Datasets” section below.\n\nApplications\n\nGeolocating pictures\n\nSome of Bellingcat’s earliest work involved figuring out where a picture was taken by cross-referencing it with optical satellite imagery.\n\nGeneral surveillance\n\nMonitoring Chinese missile silo construction.\nAmassing evidence of genocide in Bucha, Ukraine\n\nDamage detection\n\nUkraine\nMali\nAround the World\n\nVerifying the locations of artillery/missile/drone strikes\n\nThe 2019 attack on Saudi Arabia’s Abqaiq oil processing facility.\n\nMonitoring illegal mining/logging\n\nGlobal Witness investigation into illegal mining by militias in Myanmar.\nTracking illegal logging across the world.\n\n\n\n\nDatasets\n\n\n\nSensor\nTimeframe\nResolution\nCoverage\n\n\n\n\nLandsat 1-5\n1972–1999\n30m\nGlobal\n\n\nLandsat 7\n1999–2021\n30m\nGlobal\n\n\nLandsat 8\n2013–Present\n30m\nGlobal\n\n\nLandsat 9\n2021–Present\n30m\nGlobal\n\n\nSentinel-2\n2015–Present\n10m\nGlobal\n\n\nNICFI\n2015-Present\n4.7m\nTropics\n\n\nNAIP\n2002-2021\n0.6m\nUSA"
  },
  {
    "objectID": "ch2.html#radar-imagery",
    "href": "ch2.html#radar-imagery",
    "title": "2  Data Acquisition",
    "section": "2.2 Radar Imagery",
    "text": "2.2 Radar Imagery\n\n\n\nShips and interference from a radar system are visible in Zhuanghe Wan, near North Korea.\n\n\nAlongside\n\nApplications\n\nChange/Damage detection\nTracking military radar systems\nMaritime surveillance\nMonitoring illegal mining/logging\n\n\n\nDatasets\n\n\n\nSensor\nTimeframe\nResolution\nCoverage\n\n\n\n\nSentinel 1\n2014-Present\n10m\nGlobal"
  },
  {
    "objectID": "ch2.html#nighttime-lights",
    "href": "ch2.html#nighttime-lights",
    "title": "2  Data Acquisition",
    "section": "2.3 Nighttime Lights",
    "text": "2.3 Nighttime Lights\n\n\n\nA timelapse of nighttime lights over Northern Iraq showing the capture and liberation of Mosul by ISIS.\n\n\nSatellite images of the Earth at night a useful proxy for human activity. The brightness of a given area at night is a function of the number of people living there and the nature of their activities. The effects of conflict, natural disasters, and economic development can all be inferred from changes in nighttime lights.\nThe timelapse above reveals a number of interesting things: The capture of Mosul by ISIS in 2014 and the destruction of its infrastructure during the fighting (shown as the city darkening), as well as the liberation of the city by the Iraqi military in 2017 are all visible in nighttime lights. The code to create this gif, as well as a more in-depth tutorial on the uses of nighttime lights, can be found in the “War at Night” case study.\n\nApplications\n\nDamage detection\nIdentifying gas flaring/oil production\nIdentifying urban areas/military bases illuminated at night\n\n\n\nDatasets\n\n\n\nSensor\nTimeframe\nResolution\nCoverage\n\n\n\n\nDMSP-OLS\n1992-2014\n927m\nGlobal\n\n\nVIIRS\n2014-Present\n463m\nGlobal"
  },
  {
    "objectID": "ch2.html#climate-and-atmospheric-data",
    "href": "ch2.html#climate-and-atmospheric-data",
    "title": "2  Data Acquisition",
    "section": "2.4 Climate and Atmospheric Data",
    "text": "2.4 Climate and Atmospheric Data\n\n\n\nSulphur Dioxide plume resulting from ISIS attack on the Al-Mishraq Sulphur Plant in Iraq\n\n\nClimate and atmospheric data can be used to track the effects of conflict on the environment. The European Space Agency’s Sentinel-5p satellites measure the concentration of a number of atmospheric gases, including nitrogen dioxide, methane, and ozone. Measurements are available on a daily basis at a fairly high resolution (1km), allowing for the detection of localized sources of pollution such as oil refineries or power plants. For example, see this Bellingcat article in which Wim Zwijnenburg and I trace pollution to specific facilities operated by multinational oil companies in Iraq.\nThe Copernicus Atmosphere Monitoring Service (CAMS) provides similar data at a lower spatial resolution (45km), but measurements are avaialble on an hourly basis. The timelapse above utilizes CAMS data to show a sulphur dioxide plume resulting from an ISIS attack on the Al-Mishraq Sulphur Plant in Iraq. The plant was used to produce sulphuric acid, for use in fertilizers and pesticides. The attack destroyed the plant, causing a fire which burned for a month and released 21 kilotons of sulphur dioxide into the atmosphere per day; the largest human-made release of sulphur dioxide in history.\n\nApplications\n\nMonitoring of airborne pollution\nTracing pollution back to specific facilities and companies\nVisualizing the effects of one-off environmental catastrophes\n\nNordstream 1 leak\nISIS setting Mishraq sulphur plant on fire\n\n\n\n\nDatasets\n\n\n\nSensor\nTimeframe\nResolution\nCoverage\n\n\n\n\nCAMS NRT\n2016-Present\n44528m\nGlobal\n\n\nSentinel-5p\n2018-Present\n1113m\nGlobal"
  },
  {
    "objectID": "ch2.html#mineral-deposits",
    "href": "ch2.html#mineral-deposits",
    "title": "2  Data Acquisition",
    "section": "2.5 Mineral Deposits",
    "text": "2.5 Mineral Deposits\n\n\n\nZinc deposits across Central Africa\n\n\nMining activities often play an important role in conflict. According to an influential study, “the historical rise in mineral prices might explain up to one-fourth of the average level of violence across African countries” between 1997 and 2010. Data on the location of mineral deposits can be used to identify areas where mining activities are likely to be taking place, and several such datasets are available in Google Earth Engine.\n\nApplications\n\nMonitoring mining activity\nIdentifying areas where mining activities are likely to be taking place\nMapping the distribution of resources in rebel held areas in conflicts fueled by resource extraction\n\n\n\nDatasets\n\n\n\nSensor\nTimeframe\nResolution\nCoverage\n\n\n\n\niSDA\n2001-2017\n30m\nAfrica"
  },
  {
    "objectID": "ch2.html#fires",
    "href": "ch2.html#fires",
    "title": "2  Data Acquisition",
    "section": "2.6 Fires",
    "text": "2.6 Fires\n\n\n\nDetected fires over Ukraine since 27/02/2022 showing the frontline of the war\n\n\nEarth-observing satellites can detect “thermal anomalies” (fires) from space. NASA’s Fire Information for Resource Management System (FIRMS) provides daily data on active fires in near real time, going back to the year 2000. Carlos Gonzales wrote a comprehensive Bellingcat article on the use of FIRMS to monitor war zones from Ukraine to Ethiopia. The map above shows that FIRMS detected fires over Eastern Ukraine trace the frontline of the war.\nFIRMS data are derived from the MODIS satellite, but only show the central location and intensity of a detected fire. Another MODIS product (linked in the table below) generates a monthly map of burned areas, which can be used to assess the spatial extent of fires.\n\nApplications\n\nIdentification of possible artillery strikes/fighting in places like Ukraine\nEnvironmental warfare and “scorched earth” policies\nLarge scale arson\n\ne.g. Refugee camps burned down in Myanmar\n\n\n\n\nDatasets\n\n\n\nSensor\nTimeframe\nResolution\nCoverage\n\n\n\n\nFIRMS\n2000-Present\n1000m\nGlobal\n\n\nMODIS Burned Area\n2000-Present\n500m\nGlobal"
  },
  {
    "objectID": "ch2.html#population-density-estimates",
    "href": "ch2.html#population-density-estimates",
    "title": "2  Data Acquisition",
    "section": "2.7 Population Density Estimates",
    "text": "2.7 Population Density Estimates\n\n\n\nPopulation density estimates around Pyongyang, North Korea\n\n\nSometimes, we may want to get an estimate the population in a specific area to ballpark how many people might be affected by a natural disaster, a counteroffensive, or a missile strike. You can’t really google “what is the population in this rectangle i’ve drawn in Northeastern Syria?” and get a good answer. Luckily, there are several spatial population datasets hosted in GEE that let you do just that. Some, such as WorldPop, provide estimated breakdowns by age and sex as well. However, it is extremely important to bear in mind that these are estimates, and will not take into account things like conflict-induced displacement. For example, Oak Ridge National Laboratory’s LandScan program has released high-resolution population data for Ukraine, but this pertains to the pre-war population distribution. The war has radically changed this distribution, so these estimates no longer reflect where people are. Still, this dataset could be used to roughly estimate displacement or the number of people who will need new housing.\n\nApplications:\n\nRough estimates of civilians at risk from conflict or disaster, provided at a high spatial resolution\n\n\n\nDatasets\n\n\n\nSensor\nTimeframe\nResolution\nCoverage\n\n\n\n\nWorldpop\n2000-2021\n92m\nGlobal\n\n\nGPW\n2000-2021\n927m\nGlobal\n\n\nLandScan\n2013–Present\n100m\nUkraine"
  },
  {
    "objectID": "ch2.html#building-footprints",
    "href": "ch2.html#building-footprints",
    "title": "2  Data Acquisition",
    "section": "2.8 Building Footprints",
    "text": "2.8 Building Footprints\n\n\n\nBuilding footprints in Mariupol, Ukraine colored by whether the building is damaged\n\n\nA building footprint dataset contains the two dimensional outlines of buildings in a given area. Currently, GEE hosts one building footprint dataset which covers all of Africa. In 2022, Microsoft released a free global building footprint dataset, though to use it in Earth Engine you’ll have to download it from their GitHub page and upload it manually to GEE. The same goes for OpenStreetMap (OSM), a public database of building footprints, roads, and other features that also contains useful annotations for many buildings indicating their use. Benjamin Strick has a great youtube video on conducting investigations using OSM data.\n\nApplications:\n\nJoining damage estimate data with the number of buildings in an area\n\n\n\nDatasets\n\n\n\nDataset\nTimeframe\nCoverage\n\n\n\n\nOpen Buildings\n2022\nAfrica"
  },
  {
    "objectID": "ch2.html#administrative-boundaries",
    "href": "ch2.html#administrative-boundaries",
    "title": "2  Data Acquisition",
    "section": "2.9 Administrative Boundaries",
    "text": "2.9 Administrative Boundaries\n\n\n\nSecond-level administrative boundaries in Yemen\n\n\nSpatial analysis often have to aggregate information over a defined area; we may want to assess the total burned area by province in Ukraine, or count the number of Saudi airstrikes by district in Yemen. For that, we need data on these administrative boundaries. GEE hosts several such datasets at the country, province, and district (or equivalent) level.\n\nApplications\n\nQuick spatial calculations for different provinces/districts in a country\n\ne.g. counts of conflict events by district over time\n\n\n\n\nDatasets\n\n\n\nDataset\nTimeframe\nCoverage\n\n\n\n\nFAO GAUL\n2015\nGlobal"
  },
  {
    "objectID": "ch2.html#global-power-plant-database",
    "href": "ch2.html#global-power-plant-database",
    "title": "2  Data Acquisition",
    "section": "2.10 Global Power Plant Database",
    "text": "2.10 Global Power Plant Database\n\n\n\nPower plants in Ukraine colored by type\n\n\nThe Global Power Plant Database is a comprehensive, open source database of power plants around the world. It centralizes power plant data to make it easier to navigate, compare and draw insights. Each power plant is geolocated and entries contain information on plant capacity, generation, ownership, and fuel type. As of June 2018, the database includes around 28,500 power plants from 164 countries. The database is curated by the World Resources Institude (WRI).\n\nApplications:\n\nAnalyzing the impact of conflict on critical infrastructure.\n\ne.g. fighting in Ukraine taking place around nuclear power facilities.\n\nCould be combined with the atmospheric measurements of different pollutants and the population estimates data to assess the impact of various forms of energy generation on air quality and public health.\n\n\n\nDatasets\n\n\n\nDataset\nTimeframe\nCoverage\n\n\n\n\nGPPD\n2018\nGlobal"
  },
  {
    "objectID": "ch3.html#getting-started",
    "href": "ch3.html#getting-started",
    "title": "3  Algorithms",
    "section": "3.1 Getting Started",
    "text": "3.1 Getting Started"
  },
  {
    "objectID": "SyriaNTL.html#data",
    "href": "SyriaNTL.html#data",
    "title": "War at Night",
    "section": "Data",
    "text": "Data\nSatellite images of Syria taken at night capture a subtle trace left by human civilization: lights. Apartment buildings, street lights, highways, powerplants– all are illuminated at night and can be seen from space. Researchers often use these nighttime lights signatures to track development; as cities grow, villages recieve power, and infrastructure is built, areas emit more light. But this works both ways. As cities are demolished, villages burned, and highways cutoff, they stop emitting lights.\nThe timelapse below uses imagery from the Defense Meteorological Satellite Program (DMSP), a joint program run by the U.S. Department of Defense and the National Oceanographic and Atmospheric Agency. One image is taken per year between 2005 and 2013:"
  },
  {
    "objectID": "SyriaNTL.html#ukraine",
    "href": "SyriaNTL.html#ukraine",
    "title": "War at Night",
    "section": "Ukraine",
    "text": "Ukraine\n\nPre-Processing\n\n\nAnalysis"
  },
  {
    "objectID": "SyriaNTL.html#iraq",
    "href": "SyriaNTL.html#iraq",
    "title": "War at Night",
    "section": "Iraq",
    "text": "Iraq\nA link to the GEE code for this section can be found here.\n\nPre-Processing\nFirst, let’s start by importing a few useful packages written by Gennadii Donchyts. We’ll use utils and text to annotate the date of each image on the timelapse. We’ll also define an Area of Interest (AOI), which is just a rectangle. You can do this manually by clicking the drawing tools in the top left. I’ve drawn an AOI over the area covering Mosul, Irbil, and Kirkuk in Northern Iraq.\nvar utils = require(\"users/gena/packages:utils\");\nvar text = require(\"users/gena/packages:text\");\n\n// define the Area of Interest (AOI)\nvar AOI = ee.Geometry.Polygon(\n        [[[42.555362833405326, 36.62010778397765],\n          [42.555362833405326, 35.18296243288332],\n          [44.681217325592826, 35.18296243288332],\n          [44.681217325592826, 36.62010778397765]]])\n\n// start and end dates for our gif \nvar startDate = '2013-01-01';\nvar endDate = '2018-01-01';\n\n// a filename for when we export the gif\nvar export_name='qayyarah_viirs'\n          \n// A palette to visualize the VIIRS imagery. This one is similar to Matplotlib's \"Magma\" palette. \nvar viirs_palette = [\n  \"#000004\",\n  \"#320a5a\",\n  \"#781b6c\",\n  \"#bb3654\",\n  \"#ec6824\",\n  \"#fbb41a\",\n  \"#fcffa4\",\n];\n\n// Visualisation parameters for the VIIRS imagery, defining a minimum and maximum value, and referencing the palette we just created\nvar VIIRSvis = { min: -0.1, max: 1.6, palette: viirs_palette };\nNext, we’ll load the VIIRS nighttime lights imagery. We want to select the avg_rad band of the image collection, and filter blank images. Sometimes, we get blank images over an area in VIIRS if our AOI is on the edge of the satellite’s imaging swath. We can filter these images, similarly to how we filter for cloudy images in Sentinel-2:\nvar VIIRS= ee.ImageCollection(\"NOAA/VIIRS/DNB/MONTHLY_V1/VCMCFG\") \n                    .select('avg_rad')\n                    // Calculate the sum of the 'avg_rad' band within the AOI\n                    .map(function(image) { \n                    var blank=image.reduceRegions({\n                                    collection: AOI, \n                                    reducer: ee.Reducer.sum(), \n                                    scale: 10})\n                                .first()\n                                .get('sum')\n                    // For each image, define a property 'blank' that stores the sum of the 'avg_rad' band within the AOI. \n                    // We're also going to take a base 10 log of the image-- this will help us visualize the data by dampening extreme values             \n                    return image.set('blank', blank).log10().unmask(0)\n                    })\n                    // Now, we can filter images which are fully or partially blank over our AOI\n                    .filter(ee.Filter.gt('blank', 10))\n                    // Finally, we filter the collection to the specified date range\n                    .filterDate(startDate, endDate)\n                    \nLet’s have a look at the first image in the collection to make sure everything’s looking right. We’ll set the basemap to satellite and center our AOI:\nMap.setOptions('HYBRID')\nMap.centerObject(AOI)\nMap.addLayer(VIIRS.first(),VIIRSvis,'Nighttime Lights')\n\nIf we decrease the opacity of the VIIRS layer, we can see the cities of Mosul, Erbil, and Kirkuk shining brightly at night. We can also see a string of bright lights between Kirkuk and Erbil– these are methane flares from oil wells.\n\n\nAnalysis\nHaving pre-processed the VIIRS imagery, we can now define a function gif that will take:\n\nAn image collection (col, in this case the nighttime lights imagery VIIRS)\nVisualization parameters (col_vis, in this case VIIRSvis)\nAn Area of Interest AOI\n\nThe function will then return a timelapse.\nvar gif = function (col, col_vis, AOI) {\n\n    // Define the date annotations to be printed in the top left of the gif in white\n  var annotations = [\n    {\n      textColor: \"white\",\n      position: \"left\",\n      offset: \"1%\",\n      margin: \"1%\",\n      property: \"label\",\n      // Dynamically size the annotations according to the size of the AOI\n      scale: AOI.area(100).sqrt().divide(200),\n    },\n  ];\n\n    // Next, we want to map over the image collection,\n    var rgbVis = col.map(function (image) {\n        // Get the date of the image and format it\n        var start = ee.Date(image.get(\"system:time_start\"));\n        var label = start.format(\"YYYY-MM-dd\");\n        // And visualize the image using the visualization parameters defined earlier.\n        // We also want to set a property called \"label\" that stores the formatted date \n        return image.visualize(col_vis).set({ label: label });\n  });\n\n    // Now we use the label proprty and the annotateImage function from @gena_d to annotate each image with the date. \n  rgbVis = rgbVis.map(function (image) {\n    return text.annotateImage(image, {}, AOI, annotations);\n  });\n\n  // Define GIF visualization parameters.\n  var gifParams = {\n    maxPixels: 27017280,\n    region: AOI,\n    crs: \"EPSG:3857\",\n    dimensions: 640,\n    framesPerSecond: 5,\n  };\n\n  // Export the gif to Google Drive\n  Export.video.toDrive({\n    collection: rgbVis,\n    description: export_name,\n    dimensions: 1080,\n    framesPerSecond: 5,\n    region: AOI,\n  });\n  // Print the GIF URL to the console.\n  print(rgbVis.getVideoThumbURL(gifParams));\n\n  // Render the GIF animation in the console.\n  print(ui.Thumbnail(rgbVis, gifParams));\n};\nOk that was a pretty big chunk of code. But the good news is that we basically never have to touch it again, since we can just feed it different inputs. For example, if I want to generate a gif of nighttime lights over a different area, it’s as simple as dragging the AOI. If I want to look at a different time period, I can just edit the startDate and endDate variables. And if I want to visualize an entirely different type of satellite imagery– Sentinel-1, Sentinel-2, or anything else, all I have to do is change the image collection (col) and visualization parameters (col_vis) variables. Now, let’s look at some timelapses.\n\nThe Fall of Mosul\nThe function returns a timelapse of nighttime lights over Northern Iraq:\ngif(VIIRS, VIIRSvis, AOI);\n\n\n\nI’ve done a bit of post-processing to this gif, adding more annotations and blending between frames to make it a bit smoother. I typically use ffmpeg and ezgif for the finishing touches.\n\n\nThis timelapse gives a play-by-play of one of the most important campaigns in the war against the Islamic State. In the first few frames, Mosul is under the control of the Kurdistan Regional Government (KRG). In the summer of 2014, ISIS captures the city, and power is cut off. Mosul and many villages along the Tigris river are plunged into darkness. In 2015, the front line in the campaign to retake the city emerges around Mosul, advancing in 2016 and 2017. Mosul is eventually retaken by the KRG in 2017, after which it brightens once again as electricity is restored.\n\n\nThe Qayyarah Fires\nFarther south, there is an interesting detail. Above the “h” in “Qayyarah”, a bright set of lights emerges just before Mosul is recaptured, around December 2016. Fleeing Islamic State fighters set fire to the Qayyarah oilfields, which burned for months.\nUsing the VIIRS data we’ve already loaded, we can further analyze the effect of the conflict using a chart. First, let’s define two rectangles (again, you can draw these) over Mosul and Qayyarah:\nvar mosul = ee.Feature(\n        ee.Geometry.Polygon(\n            [[[43.054977780266675, 36.438274276521234],\n              [43.054977780266675, 36.290642221212416],\n              [43.24792516796199, 36.290642221212416],\n              [43.24792516796199, 36.438274276521234]]], null, false),\n        {\n          \"label\": \"Mosul\",\n          \"system:index\": \"0\"\n        }),\n\n    qayyarah = ee.Feature(\n        ee.Geometry.Polygon(\n            [[[43.08240275545117, 35.8925587996721],\n              [43.08240275545117, 35.77899970860588],\n              [43.26642375154492, 35.77899970860588],\n              [43.26642375154492, 35.8925587996721]]], null, false),\n        {\n          \"label\": \"Qayyarah\",\n          \"system:index\": \"0\"\n        })\n\n// Let's put these together in a list \nvar regions=[qayyarah, mosul]\nOnce we’ve got the rectangles, we can make a chart that will take the mean value of the VIIRS images in each rectangle over time:\nvar chart =\n    ui.Chart.image\n        .seriesByRegion({\n          imageCollection: VIIRS,\n          regions: regions,\n          reducer: ee.Reducer.mean(),\n          seriesProperty:'label'\n        }).setOptions({\n          title: 'Nighttime Lights'\n        });\n        \nprint(chart)\n\nWe can clearly see Mosul (the red line) darkening in 2014 as the city is taken by ISIS. During this period the Qayyarah oilfileds are, as we might expect, quite dark. All of a sudden in 2016 Qayyarah becomes brighter at night than the city of Mosul ever was, as the oilfields are set on fire. Then, almost exactly when the blaze in Qayyarah is extinguished and the area darkens (i.e. when the blue line falls back to near zero), Mosul brightens once again (i.e. the red line rises) as the city is liberated.\n\n\n\nThe Battle for Aleppo\nThe images below were taken between 2012 and 2014. Vast swaths of the city darken as neighbourhoods are razed by fighting.\n\nThough this is a trend that can be observed across the country, nowhere is the decline in nightlights more visible than in Aleppo. Below is a comparison of longitudinal trends in nighlights signatures between several cities:\n\nThe most salient trend is Aleppo plummeting over the course of 2012, and becoming steadily darker over the course of the next four years. Raqqa drops in 2012 as well, but remains in flux until 2017, when the battle to reclaim the city pluges it into near total darkness. Damascus also experiences a dip in 2012, but stabilizes relatively quickly. The Turkish city of Gaziantep– less than 100km from Aleppo and roughly 1/5th the size– stands in stark contrast to the Syrian cities, becoming progressively brighter over the entire period.\nAnother interesting pattern here is the difference in seasonal trends in nightlights. Under normal circumstances in this part of the world, cities become brighter at night during the summer months. Restaurants, bars, and markets stay open later and conduct business outdoors. Gaziantep, which still attracts scores of tourists every year, displays pronounced seasonality. Damascus, the most stable of the three Syrian cities, also maintains a seasonal trend throughout the war. In contrast, both Raqqa and Aleppo maintain extremely low and roughly constant levels of nightlights year-round during the periods following intense fighting.\nReliable economic data for Syria haven’t been available for nearly a decade, and assessing the country’s recovery is consequently difficult. But subtle indications of economic growth are visible above: all three Syrian cities have been on a steady upward trend since 2017, and beginning to display seasonal variation once again.\n\n\nFighting for Oil\nThroughout the war, sudden massive spikes in nightlights signatures can be observed throughout the country. In the center of the map just west of Palmyra, some particularly large spikes occur in 2017:\nThese flashes of light show gas wells being set on fire, a common form of sabotage carried out by retreating Islamic State fighters. Modified Sentinel-2 imagery of the Hayyan gas field (indicated by the green box above) shows this in greater detail. Substituing the Red band in an RGB image with Near Infrared (NIR) highlights thermal signatures, showing fires burning brightly even during the day.\nThe large complex on the right is the Hayyan Gas Plant, which produced nearly 1/3 of Syria’s electricity. The plant and its associated wells changed hands several times throughout the war, but were under Islamic State control until February 2017. In the video below, Islamic State fighters can be seen rigging the plant with explosives and destroying it on January 8th:\nIn February, three Russian oil and gas companies (Zarubij Naft, Lukoil and Gazprom Neft) were given restoration, exploration, and production rights to the hydrocarbon deposits West of Palmyra. On January 12th, 2017, the Syrian Army’s 5th Legion and Russian special forces launched a counterattack known as the “Palmyra offensive”, with the aim of retaking several important hydrocarbon deposits including Hayyan.\nThe timing of well fires aligns closely with a detailed timeline of the campaign.The Near Infrared Sentinel-2 image below shows the layout of the Hayyan Gas Plant and the wells in the Hayyan gas field:\nThe Syrian Army took the Hayyan gas field on February 4th, and retreating ISIS fighters set fire to wells 1, and 3. However, ISIS managed to briefly retake the Hayyan field on February 7th, setting fire to wells 2 and 4. These moments in the Palmyra Offensive are captured in NIR signatures\nInterestingly, despite the massive explosion caused by the bombing of the Hayyan Gas Plant, no prolonged thermal anomalies were detected over the area of the plant itself. The well fires, on the other hand, lasted for months. Below is an image of well fire at the Hayyan field taken from this video; based on the nearby infrastructure and date (04/02/2017) of posting, it is likely Well-3."
  },
  {
    "objectID": "RojavaRefineries.html",
    "href": "RojavaRefineries.html",
    "title": "Refinery Detection",
    "section": "",
    "text": "Machine Learning Workflow\nNow that we’ve got a model that can identify oil from multispectral satellite imagery fairly well, we can set about making our results accessible.\nOne of the things we’re particularly interested in is the distribution of small refineries. The way we’re currently visualizing the prediction (the raster output from the model where predicted oil is shown in red and everything else is transparent) makes it hard to see these small refineries when we zoom out:\nWe can convert our raster into a series of points using the reduceToVectors function. In essence, this takes homogenous regions of an image (e.g., an area predicted to be oil surrounded by an area not predicted to be oil) and converts it into a point:\nNow the distribution of small refineries is much more easily visible as blue dots:\nIf we zoom out even further, we can see clusters of points that correspond to areas of high oil production. Using geolocated photographs, we can roughly ground-truth the model output:"
  },
  {
    "objectID": "RojavaRefineries.html#pre-processing",
    "href": "RojavaRefineries.html#pre-processing",
    "title": "Refinery Detection",
    "section": "Pre-Processing",
    "text": "Pre-Processing\nAs always, the first step in our project will be to load and pre-process satellite imagery. For this project, we’ll be using Sentinel-2 imagery. Let’s load imagery from 2020-2021, filter out cloudy images, and define visualization parameters:\nvar start='2020-04-01'\nvar end='2021-07-01'\n\nvar bands = ['B2', 'B3', 'B4','B5','B6','B7','B8', 'B8A','B11','B12']\n\nvar sentinel = ee.ImageCollection('COPERNICUS/S2_SR')\n                  .filter(ee.Filter.date(start, end))\n                  .filter(ee.Filter.lt('CLOUDY_PIXEL_PERCENTAGE', 10))\n                  .mean()\n                  .select(bands)\n\nvar s_rgb = {\n  min: 0.0,\n  max: 3000,\n  bands:['B4', 'B3', 'B2'],\n  opacity:1\n};\nWhen loading the Sentinel-2 imagery, I’ve also onlyh selected the bands that we will ultimately use in our analysis. There are a number of other bands included in the data that we don’t need. I’ve omitted a few bands (B1, B9, B10) because they’re collected at a much lower spatial resolution (60 meters) compared to the other bands.\nA couple types of landcover are so readily identifiable that we can remove them with thresholds. Water and vegetation both have spectral indices; we looked at NDVI above, but there’s a similar one for water called NDWI. These can be calculated from Sentinel-2 imagery as follows:\nvar ndvi=sentinel.normalizedDifference(['B8','B4'])\n                  .select(['nd'],['ndvi'])\n\nvar ndwi=sentinel.normalizedDifference(['B3','B8'])\n                  .select(['nd'],['ndwi'])\nWe use the normalizedDifference function and specify which bands we want to use for each index. NDVI uses the red and near infrared bands (B4 and B8), while NDWI uses bands 3 and 8. Finally, we want to rename the resulting band from ‘nd’ to the name of the spectral index.\nNow we can use these indices to filter out water and vegetation. We do this using the updateMask function, and specify that we want to remove areas that have an NDVI value higher than 0.2 and and NDWI value higher than 0.3. You can play around with these thesholds until you achieve the desired results.\n\nvar image=sentinel.updateMask(ndwi.lt(0.3))\n                  .updateMask(ndvi.lt(0.2))\n                  .addBands(ndvi)\n                  .select(bands)\nWe also want to only select bands that are relevant to our analysis; Sentinel\nFinally, let’s clip the image to our Area of Interest (AOI) and add it to the map using the visualization parameters we defined earlier.\nMap.addLayer(image.clip(AOI), s_rgb, 'Sentinel');\n\n\n\nwater and vegetation have been removed from this Sentinel-2 image. What remains is largely fallow agricultural land, urban areas, and oil spills.\n\n\nNow that we’ve loaded and preporcessed our satellite imagery, we can proceed with the rest of our task. Ultimately, we want to create a map of the study area which shows us different “landcovers” (materials). This can broadly be achieved in three steps:\n\nGenerate labeled landcover data\nTrain a model using labeled data\nValidate the model"
  },
  {
    "objectID": "RojavaRefineries.html#generating-labeled-data",
    "href": "RojavaRefineries.html#generating-labeled-data",
    "title": "Refinery Detection",
    "section": "1. Generating Labeled Data",
    "text": "1. Generating Labeled Data\nA vital step in any machine learning workflow is the generation of labeled data, which we will use to train a model to differentiated between different types of land cover and later to test the model’s accuracy. By looking around the study area, we can get a sense of the different land cover classes that we might encounter:\n\nAgricultural Land\nUrban Areas\nOil Contamination\n\nNaturally we could subdivide each of these into sub-categories, and there are probably other classes we haven’t included that may be present in the study area. The choice of classes is partly informed by the nature of the task at hand. In theory, the most efficient number of classes for this task would be two: oil, and everything else. The problem is that the “everything else” category would be pretty noisy since it would include a wide range of materials, making it harder to distinguish this from oil. In practice, a visual inspection of major landcover classes in the study area is a quick-and-dirty way of getting at roughly the right number of classes. This is also an iterative process: you can start with a set of labeled data, look at the model results, and adjust your sampling accordingly. More on this later.\nThe main landcover class we’re interested in is, of course, oil. Some oil contamination is readily visible from the high resolution satellite basemap; rivers of oil flow from the leaking Ger Zero refinery. We can draw polygons around the oil contamination like so:\n\nThe same process is applied to agricultural land and urban areas. In general, you want to make sure that you’re sampling from all across the study area. I’ve generated between 4-10 polygons per landcover class in different places. We’re now left with a featureCollection composed of polygons for each class. I’ve named them oil, agriculture, and urban.\nHowever, I don’t just want to use all of the pixels contained in these polygons for training. There are several reasons for this. First, it would likely lead to overfitting. Second, there are probably over a million pixels between all of the polygons, which would slow things down unnecessarily. Third, I haven’t drawn the polygons to be equal sizes across classes, so I could end up with way more points from one class compared to another. It’s OK to have some imbalance between classes, but you don’t want it to be extreme.\nAs such, the next step involves taking random samples of points from within these polygons. I do so using the randomPoints function:\nvar oil_points=ee.FeatureCollection.randomPoints(oil, 3000).map(function(i){\n  return i.set({'class': 0})})\n  \nvar urban_points=ee.FeatureCollection.randomPoints(urban, 1000).map(function(i){\n  return i.set({'class': 1})})\n  \nvar agriculture_points=ee.FeatureCollection.randomPoints(agriculture, 2000).map(function(i){\n  return i.set({'class': 2})})\nIn the first line, I create a new featureCollection called oil_points which contains 3000 points sampled from the polygons in the oil featureCollection. I then map through each of these points, and set a property called “class” equal to 0. I do the same for the urban and agricultural areas, setting the “class” property of these featureCollections to 1 and 2, respectively. Ultimately, our model will output a raster in which each pixel will contain one of these three values. A value of 0 in the output will represent the model predicting that that pixel is oil, based on the training data; a value of 1 would indicate predicted urban land cover, and 2 predicted agricultural landcover.\nNow we want to create one feature collection called “sample”, which will contain all three sets of points.\nvar sample=ee.FeatureCollection([oil_points,\n                                  urban_points,\n                                  agriculture_points\n                                  ])\n                                  .flatten()\n                                  .randomColumn();\nWe’ve also assigned a property called “random” using the randomColumn function. This lets us split our featureCollection into two: one used for training the model, and one used for validation. We’ll use a 70-30 split.\nvar split=0.7\nvar training_sample = sample.filter(ee.Filter.lt('random', split));\nvar validation_sample = sample.filter(ee.Filter.gte('random', split));"
  },
  {
    "objectID": "RojavaRefineries.html#training-a-model",
    "href": "RojavaRefineries.html#training-a-model",
    "title": "Refinery Detection",
    "section": "2. Training a Model",
    "text": "2. Training a Model\nHaving generated labeled training and testing data, we now want to teach an algorithm to associate the pixels in those areas (in particular, their spectral profiles) with a specific landcover class.\nThe list of points we generated in the previous step contain a label (0: oil, 1: urban, 2: agriculture). However, they do not yet contain any information about the spectral profile of the Sentinel-2 image. The sampleRegions function lets us assign a the band values from an image as properties to our feature collection. We do this for both training sample and the validation sample.\nvar training = image.sampleRegions({\n  collection: training_sample,\n  properties: ['class'],\n  scale: 10,\n});\n\nvar validation = image.sampleRegions({\n  collection: validation_sample,\n  properties: ['class'],\n  scale: 10\n});\nEach point in the featureCollections above will contain a property denoting each Sentinel-2 band’s value at that location, as well as the property denoting the class label.\nNow we’re ready to train the model. We’ll be using a Random Forest classifier, which basically works by trying to separate your data into the specified classes by setting lots of thresholds in your input properties (in our case, Sentinel-2 band values). It’s a versatile and widely-used model.\nWe first call a random forest classifier with 500 trees. More trees usually yields higher accuracy, though there are diminishing returns. Too many trees will result in your computation timing out. We then train the model using the train function, which we supply with the training data as well as the name of the property that contains our class labels (“class”).\nvar model = ee.Classifier.smileRandomForest(500)\n                          .train(training, 'class');\nThe trained model now associates Sentinel-2 band values with one of three landcover classes. We can now feed the model pixels it has never seen before, and it will use what it now knows about the spectral profiles of the differnt classes to predict the class of the new pixel.\nvar prediction = image.classify(model)\nprediction is now a raster which contains one of three values (0: oil, 1: urban, 2: agriculture). We’re only interested in oil, so let’s isolate the regions in this raster that have a value of 0, and add them in red to the map:\nvar oil_prediction=prediction.updateMask(prediction.eq(0))\n\nMap.addLayer(oil_prediction, {palette:'red'}, 'Predicted Oil Conamination')"
  },
  {
    "objectID": "RojavaRefineries.html#validation",
    "href": "RojavaRefineries.html#validation",
    "title": "Refinery Detection",
    "section": "3. Validation",
    "text": "3. Validation\nThe image above should look somewhat familiar. It’s Ger Zero, where we trained part of our model. We can see in red the areas which the model predicts to be oil pollution. These largley align with the areas that we can see as being contaminated based on the high resolution basemap. It’s not perfect, but it’s pretty good.\nLet’s scroll to another area, far from where the model was trained.  This image shows two clusters of makeshift refineries which were identified by the model. This is good, though we can only get so far by visually inspecting the output from our model. To get a better sense of our model’s performance, we can use the validation data that we generated previously. Remember, these are labeled points which our model was not trained on, and has never seen before.\nWe’ll take the validation featureCollection containing our labeled points, and have our model classify it.\nvar validated = validation.classify(model);\nNow the validated variable is a featureCollection which contains both manual labels and predicted labels from our model. We can compare the manual labels to the predicted output to get a sense of how well our model is performing. This is called a Confusion Matrix (or an Error Matrix):\nvar testAccuracy = validated.errorMatrix('class', 'classification');\n\nprint('Confusion Matrix ', testAccuracy);\n\n\n\n\n\n\n\n\n\n\n\n\n\nLabels\n\n\n\n\n\n\n\nOil\nUrban\nAgriculture\n\n\n\nOil\n876\n1\n5\n\n\nPrediction\nUrban\n0\n168\n8\n\n\n\nAgriculture\n1\n4\n514\n\n\n\nNow, we can see that of the 877 points that were labeled “oil”, only one was falsely predicted to be agicultural land. The model also falsely predicted as oil one point that was labeled urban, and five points that were labeled agriculture. Not bad. We can get a sense of the model’s overall accuracy using the accuracy function on the confusion matrix:\nprint('Validation overall accuracy: ', testAccuracy.accuracy())\nThis tells us that the overall accuracy of our model is around 98%. However, we shouldn’t take this estimate at face value. There are a number of complicated reasons (spatial autocorrelation in the training data, for example) why this figure is probably inflatred. If we were submitting this analysis to a peer-reviewed journal, we’d take great care in addressing this, but for our purposes we can use the accuracy statistics to guide our analysis and get a rough sense of how well the model is performing.\nThis model isn’t perfect; it often misclassifies the shorelines of lakes as oil, or certain parts of urban areas. As previously mentioned, training a model is often an iterative process. At this stage, if your accuracy is not as high as you’d like it to be, you can use the output to figure out how to tweak the model. For example, you may observe that your model is confusing urban areas with oil spills. You can draw a polygon over the erroneous area, label it urban landcover and retrain the model thereby hopefully improving accuracy. We could further refine our model in this way."
  }
]